<output id="jjphb"></output>

          <progress id="jjphb"><del id="jjphb"></del></progress>

        <noframes id="jjphb">
        <sub id="jjphb"><del id="jjphb"><rp id="jjphb"></rp></del></sub>
        <noframes id="jjphb"><thead id="jjphb"><delect id="jjphb"></delect></thead>

        #

        Technical

        Troubleshooting


        JB Vacuum pumps are not intended for use on Amonia or Lithium Bromide (salt water) systems. Both of these systems will cause the pumps to lock up and be rendered inoperable. Use of JB pumps on either of these systems will void the warranty.

        IMPORTANT- Always check the oil level with the pump running. The reason for this is that if the vacuum is not broken before pumps are shut down the oil in the cover will seek the vacuum still in the cartridge and intake chamber. Then the oil level will drop in the sight glass and give the appearance of a low oil level. Then if the pump is refilled to the oil level line and the pump started, the oil that got sucked back into the cartridge and intake chamber will be kicked back into the cover and now you’ll be over filled and the oil will shoot out the handle (exhaust port).   

         

                 
        Keeping the Life of Your Pump
        includes some troubleshooting tips

        Cross Reference of Vacuum Measurements

        Cross Reference Boiling Temperatures of Water at Converted Pressures

        Isolation Valve Leak Test

        Principles of Deep Vacuum includes information on measuring evacuation, how to select the right vacuum pump, using a vacuum gauge and evacuation tips

        RSES article in association with JB on Deep Vacuum Principles and Application

        Troubleshooting Digital Superheat/ Subcooling Gauge (SH35N-SH36N)

         

         

        图片区 亚洲 在线视频_在线观看免费视频日本高清_免费阿v网站在线观看g_五月激激激综合网